Simple Beaded Loop Earring Pattern

I'm on a beading kick lately... and decided to expand my design collection to earrings.  I wanted to make something quick, easy but eye-catching - and this is what I came up with.  You will need:

26 gauge artistic wire in matching color

8 lime 4mm bicone Swarovski crystals

14 lime 4mm bicone Swarovski crystals

4 aqua 6mm bicone Swarovski crystals

2 silver plated findings

2 silver plated "fish hook" earring findings

You can use any color combination of crystals - this just happened to be what I had on-hand that matched the wire I had... so - in other words - you can go crazy and make dozens of these with no problem using just your current supplies.

Cut a piece of wire about 6" long. String the finding and crystals on the wire in this pattern: 1 finding, 1 aqua 4mm, 1 lime, 1 aqua 4mm, 1 aqua 6mm, 1 aqua 4mm, 1 lime, 1 aqua 4mm, 1 lime, 1 aqua 4mm, 1 aqua 6mm, 1 aqua 4mm, 1 lime and 1 aqua 4mm. 

Bring the end of the wire around and back through the finding. Pull the wire tight so the crystals form a "hoop" below the finding.

 

Thread the 2 wire ends through the earring wire. Bend the 2 wires and wrap around the bottom of the earring. Continue wrapping the wire neatly around the top until you have formed a slight "ball" of wrapped wire. Slide the tightener down the earring. If necessary trim excess wire and tuck ends into wrapped wire ball to prevent scratching. 

  Place a drop of jeweler's glue or clear nail polish near the ends of the wire that are tucked into the wrapped wire ball as an added precaution against scratching.  Then go out and let them sparkle in the sun. 

I actually liked them so much - I made a bunch to use as shade pulls for my windows. - very pretty.

~ Dani